how to avoid the running noise of gearboxes?-尊龙凯时网址

the rise of industry 4.0 is helping factories and manufacturers by improving producing efficiency, accelerating the transform to automation and intelligence, meantime increasing the need for robotics. there are also more demand for drive parts such as motors and gearboxes from electric vehicles, industrial robotic arms, medical equipment, arms industry, green energy and other industries. taking electric vehicle as an example, motors that operate nearly silently replace the internal combustion engine, and the gear meshing sound in the power train becomes the main source of noise. in order to reduce the noise of gears at high speed, the precision levels of gear machining must be greatly improved. gearboxes and speed reducers are key components of the mechanical transmission system, high-grade gears and low operating noise are necessary requirement and performance.
 

what causes gearbox to make noise?

the noise of a gearbox or a speed reducer is due to friction, vibration, collision of gears, especially when it is running at the high load and high speed. moreover, if required precision is not achieved or the backlash is too large when designing, manufacturing and assembling gears, the noise and vibration will be produced during operation. the causes of noise after long time operation may be gear surface wear, bearing damage or insufficient lubricant.
 

how to avoid or reduce the noise?

the factors that cause the noise or vibration of the gearbox may come from design, manufacturing, assembly or other components. but it is undeniable that gears are the main source of running noise. reducing the operating noise to maintain normal operation and ensuring the reliability is one of the prerequisites for the quality of the gearbox. the following points should be considered in the design, manufacture and assembly of gear systems.

1. choose gears with good precision
   reduce pitch error and improve the accuracy to reduce noise.
2. use smooth surface-finished gears
   gear grinding improves accuracy and smoothness of tooth surface, or proper run-in operation is also effective on reducing noise.
3. correct tooth surface contact
   proper tooth profile trimming or modification to avoid tooth surface impact.
4. proper backlash
   the greater the distance, the louder the impact when the gears mesh. smaller backlash will help in reducing noise.
5. higher contact rate
   higher contact rate and larger overlap ratio will reduce noise during operation. therefore a helical gear with higher contact ratio is quieter than spur gear.
6. higher rigidity
   increasing the rigidity of gears, housing (ring gear) and shafts will help in reducing noise.
7. use material with high vibration damping rate
   cast iron gears are more effective in reducing noise than steel gears.
8. proper lubrication
   sufficient lubricant is important to a gearbox. lubricant with high viscosity tend to be less noisy.
9. lower speed and lower load
   low speed and load produce lower noise.

 

what have sesame done to avoid or reduce gear noise?

in order to deliver products with superior quality and reliability, to obtain the trust of customers, the parts and components are carefully inspected during assembly procedures. every effort we make is to ensure each product can be installed and used after delivery. the parts and components are machined by advanced machine tools. we use quality and sufficient lubricant to optimize gearbox performance, detent and record the running noise by instrument to verify the operation requirement. as long as any problem is found, the gearbox will be disassembled, inspected, re-assemble and tested again till it meets the standard.
 

how to prove sesame gearboxes are qualified?

we made running noise standard for each product and set up several testing rooms, in which multiple layers of sound absorbing materials and sound blocking materials are used to prevent interference from other voice. the operation sound of gearboxes are tested by instrument and the results are recorded. the operators must test the products according to standard operating procedures.
 

conclusion

there are quite a few factors that affect the noise produced during the operation of the gearbox or speed reducer including the gear material, machining precision, contact ratio between meshing gears, backlash, tooth shape, the smoothness of tooth surface and running conditions. in general, higher precision gears generate smaller noise during operation. therefore, the precision of gears must be carefully considered no matter in the design or the manufacturing process, or even final assembly. sesame gearboxes and speed reducers have been rigorously designed, repeatedly tested and provide customers with the most suitable choice.